Welcome
Latest Posts
0
A Hit Song to Save the World
Unknown
Monday, April 15, 2013
A friend posted this video about hit songs. It is meant to be a parody, but at some level it speaks some truth.
2
Engineer Smart Guide: The SSL Duality
Unknown
Wednesday, March 13, 2013
Engineer Smart Guide: The SSL Duality
Here is a guide I made for a class a few quarters ago on the SSL Duality Console. I dug it up to remember a few things after having spent a few quarters away from it. I realized I couldn't find anything like this online so Im sharing it with you guys. Enjoy! (Lengthy but worth it)
The Duality Channel
Bay
·
Input Section
o
2
Independent Prea Amps: Super Analogue and VHD (variable harmonic distortion)
o
Add
warmth, or aggressiveness
o
Phase
Invert Capable
o
The
Daw-Return can be used to return a line level signal to be processed by SSL
onboard preamps. (Experiment. Push in to activate VHD)
o
20db
gain, Pad, 2ndary gain stage.
·
Dynamics Section
o
SSL
allows setting the dynamics of each channel strip via its compressor, gate, and
expander
o
Fast
attack capabilities for percussive sounds (drums) Push in for F.A.
o
Can
bypass compressor by setting ratio to 1:1, which will run through the
electronics but not compress the signal.
o
RMS
and Peak Mode capabilities
o
Gate
has a variable hold time, which means I can better control the release.
o
Side
Chaining is made easy with SSL side chain function.
·
EQ Section
o
4
band, twin curve EQ
o
Careful
with HF and LF not to be confused with HPF and LPF, seems counterintuitive
o
E
Series and G series signature sounding EQ
o
REMEMBER
TO SET TO SPLIT when needed in order to use the channel strip out of the
DAW-return.
o
ALWAYS
ZERO EQ before recording, once it is recorded it can not be undone. Record dry
without EQ when possible and EQ later.
o
The
CHOP function allows the routing to be changed on the fly including the order
of processing.
§ The TFT display will light up
accordingly to show what is in the signal chain.
o
HF,
HMF, LMF, LF
o
Q
width, FREQ select and Gain knobs
o
EQ
IN must be pushed in to use EQ
o
Can
be set to pre or post fader EQ
·
The
Cue mix can be set and panned via
the CUE MIX knob.
·
4 FX Busses are also in the channel strip. These
interface with the Reverb Unit, corresponds to E1, E2, E3, E4 (SEE boucing
with FX section in this manual)
·
The
5.1 Pan is also found Below this
section. REMEMBER TO SET PAN TO TRACK
VIA THE ROUTING SECTION TO ACHIEVE PANNING. Set output of signal to stereo, 1 –
2, 3-4, etc.
·
Split
Capability allows returning the daw signal back through the channel strip.
·
CHOP
must be set to either Input or Pre Fader, which will allow the clean signal to
be routed to the DAW, the I can monitor the processed signal in the analogue
domain. WARNING!!! I DESTROYED A PROJECT
IN THIS MANNER. IF YOU WIGH TO RECORD WITH THE CHANNEL STRIP EQ MAKE SURE TO
DOUBLE CHECK THIS SETTING.!!!! IMPORTANT!!!
Recording
Acoustic Guitar with a stereo setup. Pan to Track can be used in this
situation for a stereo image (figure 2.1)
Routing and Center
Section
·
The
center section allows easy routing and monitor control from one area of the
board.
·
Includes Trackball (the bane of my existence,
bring in mouse if possible, Group and Master Fader
o
TO SET MASTER FADER HOLD DOWN THE
MASTER FADER AND MIX BUTTONS simultaneously.
·
Daw
Transport, for ease combine the use of this and the mouse.
·
Oscillator
and noise generator are found in this section. (Never used it)
·
Mini
A are the main speakers, Mini B are the Nearfields.
·
Talkback
Mic: Set levels, use TB button to talk.
o
Set
up a microphone as TB by setting to a channel, setting mic in a good location
then set that mic on I (for input monitor) or set to record enabled in order to
hear.
o
Follow
good TB procedures, respect the artist, make sure not to broadcast anything by
accident.
o
Set
Fold back A for the TB. Make sure mix level and gain level are appropriate as
to not hurt the ears of the musicians.
·
Assigning
of buss summing, inserts, etc found here also, including 4 dedicated stereo
returns.
o
These
can be used to FX and sub mixing.
·
TFT
metering can also be found here, as well as the Total Recall functions via the
TFT screen on the consoles center section.
·
To
select channels in the Routing Tile section press – and + simultaneously to reset.
o
WARNING!!!:
Careful when applying Phantom power, as
setting to all channels will ruin a microphone that should not receive it, such
as ribbon mics. Make sure only the desired channels are selected.
o
Panning: in order to pan a track to a stereo
pair, PAN TO TRACK must be enabled for that track.
·
Phase
Meter: Right is Good, Left is Bad! Stay to the right of Zero, pay attention to
this when panning to minimize phasing issues.
·
LOOK
out for: is your DIM and CUT setting
appropriate? Careful with pops, distortion, hot signals as not to blow the
monitors.
·
TOTAL RECALL
---------------------------------------------------------------------------------------------
o
Total
Recall allows the user to store the settings on most of the knobs on the board.
o
It
will automatically turn on or off any relays but the knob settings need to be
returned by hand.
o
After
saving a “Track” to a “Project” to the Total Recall system pulling up the track
will bring up the TFT’s total recall menu.
o
Each
screen will show one channel strip, turn the knobs until the highlighted are is
matched accordingly. Proceed through all the channels.
o
Remember
that when using total recall in hand with outboard equipment the SSL Total
Recall function will not save outboard equipment settings. For that reason when
using any of the outboard equipment, USE
ONE OF THE SETTING RECALL SHEETS IN THIS MANUAL TO MAKE A COPY AND SAVE THE
SETTING. ALSO SAVE THE SHEET IN ONE OF THE POCKETS IN THIS MANUAL FOR SAFE
KEEPING.
o
This
will allow multiple people to recall a sessions settings much faster than it
would take one person. As the engineer recalls the board, the assistant can
easily set up the compressor units according to the recall sheets.
o
DO NOT ERASE ANYONES SETTINGS!!! This is very possible and
non-reversible. Please be careful and mind your fingers.
(Fig 3.1) Recording in the booth is a
great option, using the AVIOM and the TB functions in the SSL’s Center section allows
for setting up a way for the artist to hear the engineer in the control room.
Bouncing with FX:
Using the TC Electronic MK II Reverb unit allows for a great
deal of flexibility and options for reverb and delay effects. In combination
with SSL’s 4 stereo mix busses the creative possibilities are endless.
E1, E2, E3,
and E4 are currently set up to correspond to mix busses 1-4.
Please follow these steps to bounce
the mix with the FX printed.
FOLLOWING THESE STEPS WILL HELP YOU AVOID BLOWING
UP THE MONITOR IN THE STUDIO!!! Feedback loops can quickly come up if
procedures are not followed properly.
1.
Bring up a new stereo track in
ProTools
2.
Set the input and output to a pair of
tracks on the board (ex 9 and 10)
3.
Label the New track (ex: Print)
4.
Bring down the fader in Pro Tools.
5.
Patch the Output of Mix L + R into
the inputs of the pair on the board (in this example 9 and 10)
6.
In order to avoid feedback the signal
coming back into the board must not go back out to the monitors or this signal
will feed back into the board causing a feedback loop!!!
7.
Remember that SSL has a greater
dynamic range than Pro Tools this can cause clipping, distortion, and unusable
levels if they are not set correctly. Make sure you allow sufficient head room.
8.
After bouncing un patch and return
all channels and equipment to their appropriate states.
(Fig 4.1 The Dryness of the ISO booth
allows for the ability to later add a variety or reverbs and delays using the
TC Icon Reverb Unit, follow proper procedures to ensure good levels and to
avoid damaging equipment.)
Hope You enjoy this guide. It sure helped me get my feet wet again! Whats your favorite board?
Hope You enjoy this guide. It sure helped me get my feet wet again! Whats your favorite board?
0
Coming to school for Audio Production has been a very
important step in pursuing my passion for music and
my career goals. I am currently developing myself as a person, business, artist, musician, producer and
marketer, all roles I will have to continue to improve as I pursue my career. Working with other artists is a
step that I am enjoying very much, not only am I networking and exposing others to my work, but I am also
developing my recording, producing, song writing and people skills. It is important for you to find ways to
network with others in the industry. What steps do you think are important in doing this?
Heres a video of Kanye and Timbaland in the Studio working on the track "Stronger."
Career Profile: Music Producer :Kanye West
Unknown
Career Profile: Music Producer :Kanye West
Music
has been a part of my life since the age of six. My grandfather was a musician
and I always enjoyed watching and listening to him play percussion and the
accordion. At the age of 9 I began to play percussion at church three days a
week, that same year I began playing music at my schools first ever Latin
Percussion group. Years later I know that I want to become a successful, Grammy
Decorated Music Producer. The opportunity and ability to create a great
sounding cohesive record, as well as the creativity developed to write and put
together hit songs, are aspects of being a producer that make my skin tingle
with excitement. To me this has always been a mystical profession, I used to
think you had to get lucky or get a record deal to become a successful producer.
However, we dont have to look to far from Chicago
to find an example that teaches us that this is not the case. Like any other
profession, a constant, incremental and steady approach to developing skills,
relationships, a portfolio and reputation is what it takes to make it in the
industry.
In the past five years no
producer has caused as much controversy as Kanye Omari West. Recently critiziced for his stunts at the video
music awards, as well as for "questioning" the president's racial priorities;
he is much better known for his ample catalog of hit songs and hot tracks. He
has produced singles for Foxy Brown, Goodie Mob, Alicia Keys, The Game, and
even Janet Jackson, Kid Cudi and Jay-Z (to name a FEW). Even though some people
now see Kanye as too arrogant for his or anyone elses good, he has attained an
uncanny reputation for being able to produce hit singles. Kanye did not begin
his career as a producer; it is a career that he developed over time.
Kanye
West started making beats in his early teens, at the age of 20 he was already
co-producing tracks for Harlem World and Mad Rapper. Taken as a protege by
No.I.D. when his career and talent was just budding, he made the wise decision
of finding a mentor with a record for success. No I.D. invited him to sit in on
his sessions. Having worked on past hits for Jermaine Dupree and Common, No
I.D. was a strong influence on Kanye's musical style and method of production.
Working with his mentor also afforded him the opportunity to meet Roc-a-fella's
A&R rep Kyombo "Hip Hop" Joshua, years later this would be the
same A&R person that would help him get his first big break. At this point
in his career Kanye was making money by selling beats to local acts as well as
recording demos and tracks. However, being able to work with a more established
producer allowed him to push his comfort zone and he began to keep his
publishing and song writer rights.
Kanye West attended Chicago State
University , as most
people know from his album releases and from his lyrics, he dropped out to
pursue his music career. This was not an unmeasured risk by Kanye, he knew that
with the industry connections he had established, as well as with the momentum
he was experiencing, he would be likely to obtain success as a producer. If there is anything I have learned from
following Kanye's career is the importance of networking. It was Roc-a-fella's
"Hip-Hop" who would later get him hooked up with Jay-z, who's
"Heart of the City" and "Lucifer" would gain him a
reputation as a talented producer. Kanye has obviouly parlayed his success as a
producer into a career as an artist and song writer, something that seems to be
a popular approach ( esp, Pharrel, No I.D. and now even Timbaland who have put
out solo albums.)
my career goals. I am currently developing myself as a person, business, artist, musician, producer and
marketer, all roles I will have to continue to improve as I pursue my career. Working with other artists is a
step that I am enjoying very much, not only am I networking and exposing others to my work, but I am also
developing my recording, producing, song writing and people skills. It is important for you to find ways to
network with others in the industry. What steps do you think are important in doing this?
0
One of the debates that music lovers of all levels often hold is "what it is good music?"
Its easy to reference Coletrane, Mick Jagger, Tito Puente, or Michael Jackson. The impact their music
had on our culture is felt decades later and they will remain, even if only as obscure samples in the hits of the future (sans Shakira, Pitbull, and Kanye West.)
The question is what exactly makes a song "good?" While this is a somewhat abstract question likened to that of comparing a Monet to a Picasso, we all know a bad song when we hear one.
But if bad songs are so transparent why do tracks like "All Gold Everything," "Baby (Bieber) and "Laffy Taffy" hold a stage at all in our mind?
The fact is that it is very difficult to single out what makes a single stand out. But we can probably agree on these three important traits:
3 Secrets to a "Hit" Song.
Unknown
Thursday, February 28, 2013
One of the debates that music lovers of all levels often hold is "what it is good music?"
Its easy to reference Coletrane, Mick Jagger, Tito Puente, or Michael Jackson. The impact their music
had on our culture is felt decades later and they will remain, even if only as obscure samples in the hits of the future (sans Shakira, Pitbull, and Kanye West.)
The question is what exactly makes a song "good?" While this is a somewhat abstract question likened to that of comparing a Monet to a Picasso, we all know a bad song when we hear one.
But if bad songs are so transparent why do tracks like "All Gold Everything," "Baby (Bieber) and "Laffy Taffy" hold a stage at all in our mind?
The fact is that it is very difficult to single out what makes a single stand out. But we can probably agree on these three important traits:
Catchy
Simplicity
Emotion
Most of the songs we consider memorable, even the ones mentioned above have a catchy element to them. Whether its "popped a molley Im sweatin' wooooo" or "In a gadda-da-vita" certain elements make a song catchy.Repetition works well in a lot of these cases because if the hook is catchy enough our own mind will repeat it when we are dazing off not even thinking about what we are repeating.In a lot of the latest hip hop songs the adlibs on the vocals are mere repetitions of what the main vocal is. This is likely for the same reason. It helps memorization, and we love to recite a song when we know the lyrics. Its a rewarding experience specially when we need to let go and enjoy a song.Simplicity is another piece of the puzzle which is often over looked. If I say Beethoven, then say: "tah-tah-tah-taaaaa!" you can fill in the rest. That's because the simplicity of this cadence when combined with repetition (which this classic masterpiece is a great example of) makes a piece easier to follow and swallow.Emotion is the reason behind music, it is art, and art is meant to touch or convey emotion. Whether its the angst and anger that results from despair, in an environment of urban crime as evident in Trap Music. The ectasy and challenges of being in a passionate relationship with whom it seems is the only person that could ever fill that void, or the collage of percussion instruments swaying in between velvety horns as they move us on the dance floor. Without emotion music fails completely.So while we may argue on what is good music and what it not, we can agree that we all experience different emotions, my mother used to say "para los gustos se hicieron los colores" colors were made for different tastes. This is more true in music than in anything else. We can all be glad that everyday we have even more choices on what to listen to, how to listen to it, and what to listen on.And here some of the Greatest Songs of All Time, Enjoy:
1
Marketing is a powerful tool that is responsible for the success of our favorite products. Sometimes we the consumers can be programmed into thinking that a product is more than it is, simply by how it is presented. I have no quarrels with innovative marketing departments, specially when they are introducing or selling a quality product. While I have seen many fad products come and go Beats by Dre are by far one of those that make my list of misleading and "hype" products.
The marketing used to sell Beats by Dre is a combination of movie, commercial, and music video placements. Dr Dre even wears them in "Three Kings" ft Rick Ross, Drake and Jay-Z.
His line "listen to this beat on my headphones" is a pretty transparent message which he obviously wants us to take seriously.
Let me preface by saying that I am a Dr. Dre fan,
he is one of those producers I still respect and looked up to growing up. However, Beats by Dre are SUB PAR headphones at best. While the love of bass is one that I share with many hip hop heads these headphones go beyond representing pleasing bass response. The Beats Solo represent the prominent bass frequency (at about 120 Hz)
as almost 3 times as loud. This may seem like a good idea, but something happens to your music and ears when you boost bass like this.
Most bass heavy music (hip hop, dance, dubstep, etc) is mixed to take into consideration the importance of bass in the track. As a matter of fact a lot of money is spent paying mix engineers to balance these songs and make sure the bass sits right in the mix. When you boos t bass this drastically you are going to "mud," or hide the clarity of the mix. This means the shine will be lost (high frequencies are masked by the harmonics of the bass for you engineers) and intelligibility in the vocals will be compromised. At first the bass is fun but after listening to them for any length of time you will experience ear fatigue. This should be the least of your worries. Studies show that prolonged exposure to bass frequencies will result in hearing loss. In order to better hear the highs of the song you will turn up the volume even more, further ruining the little hairs that send the acoustic signals to your brain.
So many teenagers and kids are using these now, it goes without saying that they have an even higher risk of hearing loss as they will be exposed to this ear abuse for more years. The more they lose, the more volume they need, you can imagine the rest.
While Beats by Dre look great, and will also make you fashionably relevant among your peers, not only will you have over spent on headphones (given the quality) but you wont hear those of us that know better, comment on how bad we feel that you do not know any better.
Here is a a frequency response chart for beats compared to another pair in the same price range. Notice the extreme dip around 8k in the Solo and the missing frequencies around 16k. While this is normal in headphones both Beats models suffer more from this deficiency. In addition when purchasing either model you get very different sound representation.
Needless to say, Beats by Dre are a "hype" product and are overpriced. So what headphones should you listen on? There are a lot of options, but there are few winners.
Monster does not have a history for creating good headphone technology or electronics(ask an audio professional, they may be good on a consumer level, they are often scoffed at by experienced audio engineers). Audio Technica in the other hand, is one of the leaders of the pack. Not only do they create great headphones, but some of the industries favorite microphones as well (At-4040 AT-4033, and AT-4020).
Why you should hate "Beats by Dre."
Unknown
Wednesday, February 27, 2013
Marketing is a powerful tool that is responsible for the success of our favorite products. Sometimes we the consumers can be programmed into thinking that a product is more than it is, simply by how it is presented. I have no quarrels with innovative marketing departments, specially when they are introducing or selling a quality product. While I have seen many fad products come and go Beats by Dre are by far one of those that make my list of misleading and "hype" products.
The marketing used to sell Beats by Dre is a combination of movie, commercial, and music video placements. Dr Dre even wears them in "Three Kings" ft Rick Ross, Drake and Jay-Z.
His line "listen to this beat on my headphones" is a pretty transparent message which he obviously wants us to take seriously.
Let me preface by saying that I am a Dr. Dre fan,
he is one of those producers I still respect and looked up to growing up. However, Beats by Dre are SUB PAR headphones at best. While the love of bass is one that I share with many hip hop heads these headphones go beyond representing pleasing bass response. The Beats Solo represent the prominent bass frequency (at about 120 Hz)
as almost 3 times as loud. This may seem like a good idea, but something happens to your music and ears when you boost bass like this.
Most bass heavy music (hip hop, dance, dubstep, etc) is mixed to take into consideration the importance of bass in the track. As a matter of fact a lot of money is spent paying mix engineers to balance these songs and make sure the bass sits right in the mix. When you boos t bass this drastically you are going to "mud," or hide the clarity of the mix. This means the shine will be lost (high frequencies are masked by the harmonics of the bass for you engineers) and intelligibility in the vocals will be compromised. At first the bass is fun but after listening to them for any length of time you will experience ear fatigue. This should be the least of your worries. Studies show that prolonged exposure to bass frequencies will result in hearing loss. In order to better hear the highs of the song you will turn up the volume even more, further ruining the little hairs that send the acoustic signals to your brain.
So many teenagers and kids are using these now, it goes without saying that they have an even higher risk of hearing loss as they will be exposed to this ear abuse for more years. The more they lose, the more volume they need, you can imagine the rest.
While Beats by Dre look great, and will also make you fashionably relevant among your peers, not only will you have over spent on headphones (given the quality) but you wont hear those of us that know better, comment on how bad we feel that you do not know any better.
Here is a a frequency response chart for beats compared to another pair in the same price range. Notice the extreme dip around 8k in the Solo and the missing frequencies around 16k. While this is normal in headphones both Beats models suffer more from this deficiency. In addition when purchasing either model you get very different sound representation.
Needless to say, Beats by Dre are a "hype" product and are overpriced. So what headphones should you listen on? There are a lot of options, but there are few winners.
Monster does not have a history for creating good headphone technology or electronics(ask an audio professional, they may be good on a consumer level, they are often scoffed at by experienced audio engineers). Audio Technica in the other hand, is one of the leaders of the pack. Not only do they create great headphones, but some of the industries favorite microphones as well (At-4040 AT-4033, and AT-4020).
Here is a great set for almost ONE THIRD the price of Beats. In addition they sound at least twice as good. They are the AT-HM50 Professional Studio Monitors:
Check them out on Amazon for yourself, it is no surprise that they have such great reviews on Amazon, I would never buy any other headphones than these. At under 125$ you wont regret trading your beats in for a set of these. You can thank me later, Ill actually be able to hear you.---Find them here: AT Professional Headphones-----
2
listen/download the audio file here
Why everyone is dumping MP3s and buying CDs.
Unknown
Monday, February 25, 2013
Before 2001 I used to wear a backpack even when it had no books. I
wasnt a backpacker, I just loved to listen to a lot of music. I could never
decide what CDs to take in my Sony walkman CD player so I took as many as
my impulsiveness demanded. Those days are now over and the MP3 has taken the
forefront in our music listening ventures. Usually, when new technology takes
front seat it is because it is significantly better. In this case the better
comes in the form of convenience A small MP3 player could carry our
entire CD collection, much more than a backpack ever could.
The Problem with
convenience is that it often comes at a price. Most times when we are trading
something of good quality for something of poor quality, but when it comes to
sound it was easy for us to be fooled. Sound is by nature an abstract concept
to most and subjective to others. In the excitement of storing as many songs as
our iPods would allow we did even noticed the trade-off. The truth is that MP3s
come with a trade off. If MP3s were cars they would be the Pintos of the lot.
Wavs and AIFFs are the Cadillacs are Mercedes, and you shouldnt settle for
less.
When a file is compressed to an MP3 an algorithm calculates which
are the least important of the frequencies and removes them. This is the simple
way to put it and I have created a file for you to listen to that will help
demonstrate the difference.
(This will work best on headphones)
I have separated the Left and Right of this next song from Nas’
Illmatic album. The left side is an MP3 and the Right side is the Wav. See if
you can tell the difference specially in the shine or highs of the track.
The MP3 sound significantly different when listened to this way. With devices holding much more information now it is very easy to rip your own library to your device using iTunes or Windows Media Player (in lossless format) and load a few albums at a time to your device.
The MP3 sound significantly different when listened to this way. With devices holding much more information now it is very easy to rip your own library to your device using iTunes or Windows Media Player (in lossless format) and load a few albums at a time to your device.
listen/download the audio file here
2
This post will surely ring true to anyone who has worked in the Music industry for any considerable amount of time. As a matter of fact, you might have noticed some of these things just from watching some of your friends (at least on Facebook) do the same.
A few decades ago (the 90s) it was very expensive to record a song or produce an album. In addition home recording was still in its infancy to many of this generation, even then, gear was expensive and very difficult to use. Things have changed now and we see A LOT of new bands, rappers, and producers have popped up everywhere.
While we may enjoy supporting our friends we may find it hard to when they are constantly barraging us with half completed work and unfinished material. In other instances your friend may be trying to convince you to come to a show, even though youve never heard them even mention they were musicians until recently.
There is nothing wrong with this renewed growth in musicians, bands, and producers, but we all know they cant all be successful, and sometimes those with talent and actual potential get thrown in the pile with those that will almost surely never make it.
So here I present you the "How to Fail as an Independent Artist" list. Feel free to change this to the "Never do the following" list if you take yourself seriously as an artist:
5 ways to fail as an Independent Artist
Unknown
Thursday, February 7, 2013
This post will surely ring true to anyone who has worked in the Music industry for any considerable amount of time. As a matter of fact, you might have noticed some of these things just from watching some of your friends (at least on Facebook) do the same.
A few decades ago (the 90s) it was very expensive to record a song or produce an album. In addition home recording was still in its infancy to many of this generation, even then, gear was expensive and very difficult to use. Things have changed now and we see A LOT of new bands, rappers, and producers have popped up everywhere.
While we may enjoy supporting our friends we may find it hard to when they are constantly barraging us with half completed work and unfinished material. In other instances your friend may be trying to convince you to come to a show, even though youve never heard them even mention they were musicians until recently.
There is nothing wrong with this renewed growth in musicians, bands, and producers, but we all know they cant all be successful, and sometimes those with talent and actual potential get thrown in the pile with those that will almost surely never make it.
So here I present you the "How to Fail as an Independent Artist" list. Feel free to change this to the "Never do the following" list if you take yourself seriously as an artist:
Constantly flood your wall with unprofessional work.
While you may be exited to share your latest track with the rest of the world, no one wants to hear distorted vocals, or muddy mixes. We all listen to a lot of professionally finished music ALL THE TIME. So even though your work may be conceptually and musically appealing our ears will hate it and we wont know why. Its the small things we cant put our fingers on. Atleast have someone professionally mix your track. You want people to take you serious, then be serious and use a professional. If you were SERIOUSLY trying to become a professional boxer, would you trust yourself to train you, or would you seek a good trainer before being thrown in the ring?Be unprepared for sessions, be late also.
Ive heard many managers, engineers, and producers, complain in the studio about how such and such artist would be great if they had good work ethic. Others show up to a session with a mess of loose leaf lyrics, and worn out from a late night before. If your not prepared to succeed, be prepared to fail.Its easy right, so dont work hard.
Talented individuals beware, as we are the ones who most often fall into this trap. Talent can blind us into thinking hard work is unnecessary. If you want to be a master at something practice and work hard. Often I hear people say their "hustling" or "grinding." This couldn't be farther from the truth if your not doing something daily to develop your art form. Write, write, then practice, practice and practice some more.Don't tell your friends, dont even put yourself out there.
Just as bad as flooding your friends is never letting anyone know what you do. If you play guitar, you should be the first person your friends think about if someone asks if they know a guitar player. Sometimes people are afraid to share what they do because they are afraid to find out they aren't talented enough to be successful. While I don't believe in letting others opinions stop you from doing what you want, wouldn't you want to know if your wasting your time as soon as possible? Well if you have honest friends you will find out quick enough if you put yourself out enough.Nobody cares about integrity so don't display any.
In the words of Tony Montana "all I have are my words and my balls and I don't break them for nobody." Is your word BOND. Are you there when you say you will? Do you cancel sessions, practices, and projects because you over commit? We've all had this issue at some point. But people will always remember the time you left them hanging, waiting, or disappointed. My advice is always tell people you will check to make sure you have no other commitments and get back to them. Most importantly... GET BACK TO THEM. Were all busy, so its more important even that we do what we say when we say it. On the same note, don't be the person that talks bad about others when their not around. If you do you will be seen as a coward, and untrustworthy. Want to increase your respect 20 fold? Get in the habit of addressing issues with people directly using tact.Successful people are willing to do what unsuccessful people are not.
So true in every way. Have any stories about dealing with some of these issues? Or do you have any other advice for Indy artists? Please share!
Bonus: I read a great book that studied why people like Michael Jordan and Bill Gates were so amazingly successful. The reason will surprise you. Check it out below. (please note this is not an affiliate link so I have no vested interest in you purchasing this book. However if you do read it let me know what you think!)
The Outliers
Subscribe to:
Posts (Atom)
ShareThis
Popular Posts
-
Engineer Smart Guide: The SSL Duality Here is a guide I made for a class a few quarters ago on the SSL Duality Console. I dug it up to...
-
Career Profile: Music Producer :Kanye West Music has been a part of my life since the age of six. My grandfather was a ...
-
We listen to thousands of songs in our lifetime. They often turn out to become the bookmarks of our lives. The song from that one summer ...
-
The Sound Mind: Its all about you. Welcome to The Sound Mind. My name is Rody (pronounced just like the your favorite bands gear lugg...
-
Marketing is a powerful tool that is responsible for the success of our favorite products. Sometimes we the consumers can be programmed ...
-
One of the debates that music lovers of all levels often hold is "what it is good music?" Its easy to reference Coletrane, ...
-
Before 2001 I used to wear a backpack even when it had no books. I wasnt a backpacker, I just loved to listen to a lot of music. I could...
-
With the arrival of high speed internet mobile devices, and the ability to store information in the cloud we have seen the birth of new ways...
-
This post will surely ring true to anyone who has worked in the Music industry for any considerable amount of time. As a matter of fact, ...
-
A friend posted this video about hit songs. It is meant to be a parody, but at some level it speaks some truth.
Search This Blog
The Author
- Unknown
Blog Archive
About the Author
Rody Fernandez is a musician with 20 years experience who decided to dedicate his life to his passion for music and audio. With his B.S. in Audio Production he plans to help create great sound for the world to enjoy. Mixing is his favorite part of the production process, his approach is creative with a keen ear for percussion.
Follow